No chemical reactions take place during the production of our hot melts. Instead, we safely combine high quality polymers with other advanced substances in a carefully controlled environment.

This removes the need for Beardow Adams to register our hot melts under the EU REACH or Registration, Evaluation, Authorisation and Restriction of Chemicals requirement.

We have also worked closely with our trusted suppliers to ensure that supply of raw materials delivered to us will be unaffected by REACH. The following end uses are incorporated into the exposure scenarios compiled by the raw material registrar:

PROC1: Use in closed process, no likelihood of exposure.
PROC2: Use in closed, continuous process with occasional controlled exposure.
PROC3: Use in closed batch process (synthesis or formulation).
PROC4: Use in batch and other process (synthesis) where opportunity for exposure arises.
PROC5: Mixing or blending in batch processes for formulation of preparations and articles (multistage and/or significant contact).
PROC7: Industrial spraying / air dispersive techniques, spraying for surface coating, adhesives, polishes/cleaners and air care products.
PROC8b: Transfer of substance or preparation (charging/discharging) from/to vessels / large containers at dedicated facilities.
PROC9: Transfer of substance or preparation into small containers (dedicated filling line, including weighing).
PROC10: Roller application or brushing.
PROC11: Non industrial spraying / air dispersive techniques.
PROC12: Use of blowing agents in manufacture of foam.
PROC13: Treatment of articles by dipping and pouring.
PROC14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation.

If your end use is not listed above, please contact your local Area Account Manager, Beardow Adams distribution Partner or email us at [email protected].

> Latest News

Find out about all our latest news, events and product developments.  View News Archive

BeardowAdams, Inc. - an adhesive manufacturer that earns your trust (case study)

Such was the case for one of our food packaging customers from the US who trialled our hot melt BAM 2430 on one of their lower volume lines. After an...

Read More

Contact Us